L22 REHEAT STRETCH BLOW MOLDING MACHINES

L22x FULLY AUTOMATIC - 2 CAVITY Up TO 2 LITRE
OR
LM 22x AUTOMATIC WITH MANUAL PERFORM LOADING - 2 CAVITY UP TO 2 LITRE

The L22 is a fully automatic 2 cavity reheat stretch blow molding machine. It has a energy saving servo electric mold clamp with pressure compensation to the actual force needed for molding. The servo-electric system operates the mold platen at high speed with only a 2hp equivalent servo motor versus a 3Ohp motor needed for a hydraulic system. Clamping force (up to 25 tons) is generated with blowing air pressure, so the higher the air pressure, the higher the clamping force generated. The clamping mechanism is self-locking in the "mold closed" position and isolates the servo electric system from the clamping forces. The two cavity unit produces 100ml to 2 liter bottles in neck finishes from 20-70mm** at rates of up to 3000 bottles/hour, depending on bottle size and preform design.

Specifications:
       • Two Cavity: 100ml to 2 Liter
       • Neck Finish: 20 mm to 70 mm**
       • Output: Up to 3000 bottles Per Hour
       • Oriented bottle discharge
       • Self diagnostic screen
       • Average energy consumption: 28 kW
       • Air Consumption: 600 psi (40Bar) up to 150 CFM 260m³/hr (8Bar)
       • Air Consumption: 120 psi 38 (23 CFM) m³/hr
       • Chilled water requirement: 60psi 3 tons
       • Molds are interchangeable with all WAE machines as well as other manufacturer's
       • Energy saving over hydraulic machines approximately US $20,000 per year (2007           electricity rates)
** 70mm neck possible with additional option.
** Also Available as a manual machine.

Technical Specifications

Based on 500 ml water subject to bottle and perform design. *20L Bottle. **Optional