L25 REHEAT STRETCH BLOW MOLDING MACHINES

L25 Fully Automatic - 2 Cavity up to 5 Liter
or
LM 25 Automatic with Manual Preform Loading - 2 Cavity up to 5 Liter

L25 Reheat Stretch Blow Molding Machines
The L25 is a fully automatic 2 cavity reheat stretch blow molding machine. It has a energy saving servo-electric clamp with pressure compensation to the actual force needed for molding. The servo-electric system operates the mold platen at high speed with only a 2hp equivalent servo motor versus a 3Ohp motor needed for a hydraulic system. Clamping force (up to 32 tons) is generated with blowing air pressure, so the higher the air pressure, the higher the clamping force generated. The clamping mechanism is self-locking in the "mold closed" position, and isolates the servo electric system from the clamping forces. The two cavity unit produces 100ml to 5 liter bottles in neck finishes from 20-70mm** at rates of up to 3000 bottles/hour, depending on bottle size and perform design.

Specifications:
       • Two Cavity: 100ml to 5 Liter
       • Neck Finish: 20 mm to 70 mm**
       • Output: Up to 3400 bottles/hour (0.5L still water)
       • Oriented bottle discharge
       • Self diagnostic screen
       • Average energy consumption: Dependant on bottle size. From 18 KW to 60 KW
       • Air Consumption: 5 liter bottles 720m³/hr 420 CFM
       • Air Consumption*: 120psi (8bar) 25 CFM(39m³/hr)
       • Chilled water requirement: 60psi 3 tons
       • Molds up to 2 liter volume from most competitors can be readily adapted for use on WAE
       • WAE molds up to 2 liters in capacity are compatible with all WAE machine models
          machines.
       • Energy saving over hydraulic machines approximately US $20,000 per year (2007           electricity rates)
** 70mm neck possible with additional option.
** 350 PSI (25bar) for 5 liter bottles 420CFM (720m³/hr)


Technical Specifications

 





 
Click to view enlarged image

  
Click to view video
CONTACT US NOW !